Black FridaySale prices on in-stock machines 5% off factory orders 100% write-off*Stock deals + 5% off factory orders Ends Dec 4

Tube notchers and pipe notching machines

A tube notcher (pipe notcher or coping machine) grinds a saddle-shaped notch into the end of a tube so it fits tightly against the tube it joins — the joint of every welded handrail, roll cage, trailer, gate and furniture frame. ISITAN's PN belt-sander notchers cope that saddle in seconds, square or at any angle up to 50°, with ten dovetail drums from Ø3/4″ to 3″ included so the notch matches the mating tube. Both sit beside the cold saw and take the hand grinding out of tube fabrication — with CSA-approved panels and support from Mississauga, ON, Canada. NovoTech's value-line notchers, built in China, add the PRS tube end grinders that notch tube from Ø3/4 to 5-3/4″ with a belt, the motorized PTN-30 hole-saw notcher, the UTN40 end-mill notchers and the PTN-12U.

Tube notcher buying guideWhat to check before you buy

ISITAN machines are made in Turkey by ISITAN Makine — sheet-metal forming machinery since 1959, with European components; NovoTech's value-line notchers are built in China to NovoTech's specification. All sold, installed and supported in Canada by NovoTech.

Specifications checked against the manufacturer's current catalogue · page updated

Tube notchers

PN belt-sander pipe notching machines with ten dovetail drums included.

PN 17/90 · PN 20/76 — motorized pipe notching machines

PN 17/90 · PN 20/76

Belt-sander tube notchers that cope a saddle on the end of a tube in seconds for welded handrail, roll-cage, furniture and frame joints. Ten dovetail drums from Ø3/4″ to 3″ are standard — pick the drum for the tube you are joining, clamp the workpiece in the moving clamp and notch square or at any angle up to 50°. The PN 17/90 takes tube from 11/16″ to 3-1/2″ OD on a 4 × 47″ belt; the PN 20/76 is the compact notcher with a movable clamp, 13/16″ to 3″ OD on a 4 × 79″ belt.

  • 10 dovetail drums standard: Ø3/4″, 13/16″, 1″, 1-1/4″, 1-1/2″, 1-5/8″, 1-7/8″, 2″, 2-3/8″, 3″ — quickly opens the right dovetail for each tube diameter
  • Fast clamping and release with the moving clamp; clamp moves left and right
  • Notching at any angle up to 50° with the movable clamp
  • PN 17/90: basic centering and easy belt adjustment, 4 × 47″ belt
  • PN 20/76: compact notcher with movable clamp, 4 × 79″ belt
  • 3 HP motor; CE certified
PN — motorized pipe notching machines Belt-sander tube notchers · 10 dovetail drums standard
Model PN 17/90PN 20/76
Notching capacitytube OD 11/16″ – 3-1/2″ (Ø17 – 90 mm)13/16″ – 3″ (Ø20 – 76 mm)
Max. notching angle 50°50°
Sanding belt 4 × 47″ (100 × 1200 mm)4 × 79″ (100 × 2000 mm)
Dovetail drums included 10 · Ø3/4″, 13/16″, 1″, 1-1/4″, 1-1/2″, 1-5/8″, 1-7/8″, 2″, 2-3/8″, 3″10 · Ø3/4″, 13/16″, 1″, 1-1/4″, 1-1/2″, 1-5/8″, 1-7/8″, 2″, 2-3/8″, 3″
Motor power 3 HP (2.2 kW)3 HP (2.2 kW)
Dimensions L × W × H 43 × 33 × 47″ (1100 × 850 × 1200 mm)53 × 28 × 47″ (1350 × 700 × 1200 mm)
Weight 375 lb (170 kg)287 lb (130 kg)

Notching capacity is the tube outside diameter; dovetail drums for other sizes are optional. Dimensions are overall L × W × H. Three-phase machines are supplied for 600 V; 208 V, 240 V or 480 V 3-phase available on request.

NovoTech Value line

Tube end grinders · value line

Belt grinders that notch tube ends at any angle with a contact roller the size of the mating tube.

NovoTech's own brand: manufactured in China to high North American quality standards, with the same CSA-approved panel, 1-year warranty and parts and support in Canada as every machine we sell

PRS tube and profile end grinders — belt notchers, Ø3/4 – 5-3/4″

PRS-76A – PRS-150 · 4 models

Belt grinders built to notch tube ends: the tube sits in the adjustable slide and is fed against a contact roller the size of the mating tube, at any angle from 30 to 90° — a clean, burr-free saddle in steel, stainless and aluminum tube and profiles without saws or tooling. The PRS-76 models take Ø3/4 – 3″ tube with a 4″ belt, two speeds and forward / reverse on the C; the PRS-150 takes Ø1-3/8 – 5-3/4″ with a 6″ belt and 7.5 HP and grinds flat and on a contact wheel as well.

  • PRS-76A / 76C / 76: tube Ø3/4 – 3″, 4 × 79″ belt, 4 HP or two-speed 3 / 3.75 HP
  • PRS-150: tube Ø1-3/8 – 5-3/4″, 6 × 79″ belt, 7.5 HP two-speed, forward and reverse
  • Notching angle 30 – 90°; contact rollers for 1/2 to 2-1/2″ pipe sizes
  • Dust collector connection; flat and contact-wheel grinding too
PRS-76A · PRS-76C · PRS-76 Tube and profile end grinders, 4″ belt — notch tube ends Ø3/4 – 3″ at 30 – 90°
Model PRS-76APRS-76CPRS-76
Motor 3 / 3.75 HP (2.2 / 2.8 kW), two-speed3 / 3.75 HP (2.2 / 2.8 kW), two-speed, forward and reverse4 HP (3 kW)
Belt size 4 × 79″ (100 × 2,000 mm)4 × 79″ (100 × 2,000 mm)4 × 79″ (100 × 2,000 mm)
Belt speed 2,953 / 5,906 ft/min (15 / 30 m/s)2,953 / 5,906 ft/min (15 / 30 m/s)5,906 ft/min (30 m/s)
Notching angle 30 – 90°30 – 90°30 – 90°
Tube diameter Ø3/4 – 3″ (20 – 76 mm) with the optional rollersØ3/4 – 3″ (20 – 76 mm) with the optional rollersØ3/4 – 3″ (20 – 76 mm)
Adjustable slide 6-1/4 × 2-3/4″ (160 × 70 mm)6-1/4 × 2-3/4″ (160 × 70 mm)6-1/4 × 2-3/4″ (160 × 70 mm)
Standard contact roller Ø1-1/8″ (28 mm)Ø1-1/8″ (28 mm)Ø1-1/8″ (28 mm)
Drive wheel ——Ø7-3/4″ (198 mm)
Graphite platen pad ——15 × 3.9″ (380 × 100 mm)
Packing size L × W × H 54 × 24 × 26″ (137 × 62 × 66 cm)54 × 24 × 26″ (137 × 62 × 66 cm)51 × 22 × 18″ (130 × 56 × 46 cm)
Weight 353 lb (160 kg)348 lb (158 kg)370 lb (168 kg)
PRS-150 Tube end grinder, 6″ belt — notch tube ends Ø1-3/8 – 5-3/4″, grind flat and on the contact wheel
Model PRS-150
Motor 7.5 HP (5.5 kW), two-speed 1,400 / 2,800 rpm, forward and reverse
Belt size 6 × 79″ (150 × 2,000 mm)
Belt speed 2,953 / 5,906 ft/min (15 / 30 m/s)
Notching angle 30 – 90°
Tube diameter Ø1-3/8 – 5-3/4″ (35 – 145 mm)
Adjustable slide, horizontal × cross 6-7/8 × 5-7/8″ (175 × 150 mm)
Standard contact rollers Ø1-1/2″ and Ø4″
Drive wheel Ø7-7/8″ (200 mm)
Contact wheel Ø1-3/8 – 5-3/4″ (35 – 145 mm)
Graphite platen pad 15.7 × 6.3″ (400 × 160 mm)
Packing size L × W × H 65 × 35 × 60″ (165 × 88 × 152 cm)
Weight 683 lb (310 kg)

Metric values in brackets are the manufacturer's figures; thin sheet is given in gauge. Packing size is the shipping crate L × W × H and weight is the net weight of the machine. Three-phase machines are supplied for 600 V; 208 V, 240 V or 480 V 3-phase available on request.

NovoTech Value line

Tube and pipe notchers · value line

Motorized hole-saw and end-mill notchers — NovoTech value line, built in China.

NovoTech's own brand: manufactured in China to high North American quality standards, with the same CSA-approved panel, 1-year warranty and parts and support in Canada as every machine we sell

PTN-30 hole-saw notcher, UTN40 end-mill notchers and PTN-12U

PTN-30 – PTN-12U · 4 models

Motorized notchers that cut the saddle on the end of a tube or pipe so it fits against another for a T or angled joint. The PTN-30 drives a bi-metal hole saw through a gearbox — 1/2 to 3″ tube and 1/2 to 2-1/2″ schedule 40 pipe at any angle from 0 to 90° with a quick-release cam vise, a taper lock and a large degree wheel; the UTN40 and UTN40V cut with an end mill — fast, without coolant, dust or noise — on 1/2 to 2″ tube with a swivel vise in 1° steps; the PTN-12U is an electric notcher for 1/4 to 2″ pipe.

  • PTN-30: tube 1/2 – 3″ OD, pipe 1/2 – 2-1/2″ schedule 40; 0 – 90°; 3/4 HP; hole-saw arbors 1/2″-20 and 5/8″-18
  • UTN40: end mill, 1-1/2 HP, 280 rpm; UTN40V: 1 HP DC, 75 – 250 rpm variable
  • V-block vise, swivels in 1° steps (UTN40)
  • PTN-12U: pipe 1/4 – 2″, electric
PTN-30 · UTN40 · UTN40V · PTN-12U Motorized tube and pipe notchers
Model PTN-30UTN40UTN40VPTN-12U
Capacity Tube 1/2 – 3″ OD, pipe 1/2 – 2-1/2″ schedule 40 (5/8 – 3″ OD)Tube 1/2 – 2″Tube 1/2 – 2″Pipe 1/4 – 2″ (inside diameter)
Notch angle 0 – 90°, large degree wheelSwivel vise, 1° stepsSwivel vise, 1° steps—
Cutter Bi-metal hole saws (1/2″-20 and 5/8″-18 arbors)End mill — no coolant, no dustEnd mill — no coolant, no dustHole saws
Motor / speed 3/4 HP (0.55 kW); 230 rpm at 60 Hz (186 at 50 Hz)1.5 HP AC motor, 280 rpm1 HP DC motor, variable 75 – 250 rpmElectric
Packing size L × W × H 35 × 25 × 18″ (90 × 63 × 45 cm)——32 × 18 × 19″ (82 × 45 × 48 cm)
Weight 143 lb (65 kg)309 lb (140 kg)265 lb (120 kg)216 lb (98 kg)

Metric values in brackets are the manufacturer's figures; thin sheet is given in gauge. Packing size is the shipping crate L × W × H and weight is the net weight of the machine. Three-phase machines are supplied for 600 V; 208 V, 240 V or 480 V 3-phase available on request.

Included with every machine from NovoTech

  • CSA-approved electrical panelEvery machine ships with a CSA-approved panel, wired for Canadian voltage.
  • Parts and support in CanadaSpare parts and technical support readily available from Mississauga, ON, Canada.
  • 7-day money-back guaranteeTry the machine in your shop — full refund within 7 days on in-stock models.
  • 1-year warrantyOn every new machine we sell, with parts and service from Mississauga, ON, Canada.
  • Made in Turkey by ISITANISITAN has built sheet-metal machinery in Bursa since 1959 — two factories, CE-certified machines with European components.
  • Installation and trainingOur technicians commission the machine and train your operators, anywhere in Canada — on request, at an additional charge.
  • Remote troubleshooting by video callOur technicians diagnose faults and guide your operator through the fix over a video call.
  • Shipping across Canada and the US from OntarioFrom our warehouse in Mississauga, Ontario, Canada, we deliver to every province and territory and export to customers anywhere in the United States — freight arranged by NovoTech at competitive rates.
  • Financing with 0% downLease or finance the machine with 0% down and competitive rates through our financing partners — keep your cash working in the shop.
  • Order today with 10% downSimple payment terms: 10% down payment to place your order, the remaining 90% before shipping from our warehouse in Mississauga, ON, Canada.
  • 5% off your second machineReturning customers get 5% off their next machine from NovoTech — our thank-you for coming back.

Three-phase machines are supplied for 600 V; 208 V, 240 V or 480 V 3-phase available on request.

Inside the factory — where the machines are built

A tour of the ISITAN plant in Bursa, Turkey, where the sheet-metal and tube machinery on these pages has been built since 1959. More videos are on NovoTech's YouTube playlist.

ISITAN company introduction video

ISITAN company introduction video

Tube notcher buying guide

What we explain to customers before they buy a tube notcher: why cope tube ends, belt, hole-saw or end-mill notchers, size and angle range, and belts, dust and safety. Written by NovoTech's sales engineers and technicians from years of installing machines in Canada.

Why cope tube ends?

Wherever one tube meets another in a T or at an angle, the end of the tube must be coped (notched) to the curve of the tube it joins. Handrail posts, roll cages, furniture and bike frames, trailers and gates are all built this way. A good cope fits with a gap of no more than about 1/16″, so the weld closes in one pass, uses less filler, distorts the frame less and looks right. Cut by hand with a grinder, a cope takes minutes and rarely fits the first time. A tube notcher cuts it in seconds, square or at an angle, and the same every time.

ISITAN PN 17/90 motorized belt-sander tube notcher, 11/16″ to 3-1/2″ OD

Belt, hole-saw or end-mill notcher?

  • Belt notchers. They grind the saddle on an abrasive belt wrapped around a drum the size of the mating tube. They are fast, work on any material, including stainless and aluminum, and leave a clean, burr-free edge. The drum is changed in seconds for the next size, and the same machine grinds flat and chamfers ends.
  • Hole-saw notchers. They drive a bi-metal hole saw of the mating tube's size through a gearbox, or from a drill or a drill press. The machine is inexpensive and the angle is easy to set, but the cut is slower, the saws dull quickly on stainless, and the edge needs deburring.
  • End-mill notchers. They cut the saddle with an end mill: fast and quiet, with no coolant, no dust, and a precise fit. They are the choice for frequent notching of small and medium tube.

For very large pipe, or when a part also needs holes and slots, a CNC plasma pipe cutter or a tube laser does the coping as part of the cut.

Size, angle and set-up

Choose the notcher by the range of tube you cope (for example 11/16″ to 3-1/2″ OD on the PN 17/90) and the angles you need. Most notchers cope from 90° down to 30° – 50°. Check that a drum, hole saw or end mill is available for every mating tube size, and that the vise holds round and square tube without marking it. An angle scale with clear degree markings, a positive lock and a stop for repeat lengths make batch work fast. If you build frames in square tube as well, a belt notcher that also grinds flat and on a contact wheel covers both.

ISITAN PN 20/76 compact tube notcher with movable clamp, 13/16″ to 3″ OD

Belts, dust and safety

Use coarse belts (36 – 60 grit) for fast stock removal on steel, and ceramic or zirconia belts for stainless, which last several times longer than standard aluminum-oxide belts. Belt notchers make grinding dust and sparks, so connect them to a dust collector and keep the area clear of anything that burns. Never grind aluminum and steel into the same collector: the mixed dust is a fire and explosion hazard. Hole-saw and end-mill notchers make chips instead of dust, but they need a guard and a vise that holds the tube firmly. The motorised notchers run on 600 V three-phase with a CSA-approved panel (208, 240 or 480 V on request), and the bench and drill-driven notchers need no power of their own. Tell us your tube sizes, materials and angles, and we will recommend the notcher.

Questions we get asked about tube notchers

What is a tube notcher for?

When one tube meets another in a T or at an angle — handrail posts, roll cages, furniture and bike frames, trailer and gate frames — the end has to be coped to the curve of the tube it joins so the weld closes without gaps. The PN notcher grinds that saddle on a sanding belt against a drum of the mating tube's diameter in seconds, square or at any angle to 50°.

Which notcher — PN 17/90 or PN 20/76?

The PN 17/90 takes the larger range, 11/16″ to 3-1/2″ OD, on a 4 × 47″ belt with easy belt adjustment. The PN 20/76 is the compact notcher for 13/16″ to 3″ OD with a longer 4 × 79″ belt and a movable clamp. Both come with the same ten dovetail drums and 3 HP motor.

Belt notcher or hole-saw notcher?

A hole-saw notcher cuts the cope with a hole saw of the mating tube's diameter — slow, and the saw dulls on stainless. The PN grinds the cope on a sanding belt wrapped around a dovetail drum, so it is faster, works on any material and leaves a clean, square-to-weld edge; the drum is swapped in seconds for the next tube size.

Hole saw, end mill or belt — which notching method?

A hole-saw notcher (PTN-30) is the lowest-cost way to cut a saddle: one inexpensive bi-metal hole saw per tube size, any angle, clean enough for most welding. An end-mill notcher (UTN40) cuts faster and more precisely, without coolant, and one cutter covers several sizes. A belt notcher (PRS) grinds the saddle against a contact roller: no burr, no sharp tooling, works on thin-wall stainless and aluminum and also finishes and deburrs. The premium-line PN machines are motorized notchers for production.

What voltage do these machines run on?

Three-phase machines are supplied for 600 V as standard with a CSA-approved panel; 208 V, 240 V and 480 V 3-phase are available on request, and 240 V single-phase on models whose main motor is 2.2 kW (3 HP) or less — a machine with a motor above 2.2 kW must run on three-phase power and cannot be converted to 240 V single-phase. Manual machines have no electrics.

Request a quote

Tell us which machine you are looking at and what you will run on it — material, sizes and voltage — and we will come back with pricing, delivery and the right options for your shop. We answer within one business day.

Prefer to talk? Call +1 647 526 5510 (Mon–Fri 9:00–17:00 Eastern) or email infoNovoTechMachineTools.com.

1365 Mid-Way Blvd, Unit 26, Mississauga, ON L5T 2J5, Canada

Your quote requestWe reply within one business day

Part drawings or sketches, photos of your parts — PDF, DWG, DXF, STEP, IGES, JPG, PNG, ZIP, Excel or Word · up to 10 files, 13 MB in total.

This form is protected by reCAPTCHA; Google's Privacy Policy and Terms of Service apply.

Represent NovoTech in your city or province

Sales agents wanted across Canada

NovoTech is appointing independent sales agents and dealers in cities and provinces across Canada — British Columbia, Alberta, Saskatchewan, Manitoba, Ontario outside the GTA, Quebec and Atlantic Canada. If you already call on steel fabricators, rebar shops, precast plants, HVAC shops or contractors, add a proven line of GMS, Dener and other metalworking machinery to what you offer.

  • Open to individuals and companies with customers in metal fabrication or construction
  • Quotations, brochures, videos and demonstrations prepared by NovoTech for your customers
  • Installation, operator training, spare parts and technical support stay with NovoTech in Mississauga, ON, Canada
Apply to become an agent Call +1 647 526 5510

Tell us your territory and the customers you serve — we reply within one business day.