Magnetic Drill - NovoTech Machine Tools

Machine Tools
Novo
Tech
Go to content
Magnetic Drill
ALFRA RotaBest SP-V Permanent Magnetic Base Drill Stand
Overview:
ALFRA RotaBest™ SP-V permanent magnetic base drill stand is revolutionizing the industry with the patented Maglogix™ permanent magnet! SP-V can be used with a variety of corded and cordless drills. This drill stand carries a 1-year warranty.
Features At A Glance:
  • Minimal material thickness is 2 mm
  • Variable drill mounts allow use of a wide range of corded or cordless drills
Package Includes:
  • ALFRA RotaBest™ SP-V Magnetic Base Drill Stand
  • Safety belt
  • User manual
  • Carrying case
Permanent Magnetic Base Core Drill : RB SP series with Magnet Safety Sensor
Overview:
ALFRA RotaBest™  metal cutting, permanent magnet base drill is revolutionizing the industry. Our rare earth magnet, in conjunction with our LED sensor ensures the safety of the user. Even if the power is cut, our magnet will stay actuated. Our three level notification sensor system notifies the user when the machine is close to lift off and will shut the motor down if lift-off is achieved. In addition, it offers variable height adjustment, a smooth start and overload protection. With the use of a drill chuck adaptor, this unit can hold a drill bit with a maximum of 1/2". This drill carries a 1-year warranty.
Features At A Glance:
  • Built-in overload protection and emergency shut-down
  • Soft start
  • Stepless height adjustment
  • Membrane keypad
  • Soft-touch handles
  • 2 Speed gearbox in RB50SP and 4 speed in RB80SP
  • electronic speed control in RB80SP LR-E model
  • tapping function in RB80SP LR-E model
  • TIN coated magnet
  • Permanent magnet
  • Magnet Sensor LED
  • Cord length 16 feet
  • 230 or 110 volt
Package Includes:
  • ALFRA RotaBest™ RB50SP Magnetic Base Core Drill
  • Tool holder with Quick-release chuck including internal cooling
  • carrying case
  • Coolant unit with hose and nipple
  • Safety belt
  • User manual
  • Carrying case
Alfra RotaBest Magnetic Drill : RB X series with magnet Safety sensor
Overview:
ALFRA RotaBest™ RB X metal cutting, magnetic base core drill is perfect for users who consistently use cutters. Variable height adjustment, a smooth start gearbox, overload protection and emergency shutdown of the motor, indicated by LED sensor. This drill carries a 1-year warranty.
Features At A Glance:
  • Built-in overload protection and emergency shut-down
  • Tapping function in RB50X and RB80X models
  • Soft-touch handles
  • Soft start
  • Stepless height adjustment
  • Membrane keypad
  • 2 Speed gearbox in RB50X and 4 speed in RB80X
  • Magnet Sensor LED
  • Cord length 16 feet
  • 230 or 110 volt
  • Quick release chuck in RB35/50X PICCOLO model only
  • Optimized power and weight
Package Includes:
  • ALFRA RotaBest™ RB X Magnetic Base Core Drill
  • Coolant unit with hose and nipple
  • Safety belt
  • User manual
  • Carrying case
Alfra RotaBest Magnetic Drill : RB RL-E , Right & Left Turn, Variable speed
Overview:
ALFRA RotaBest™ RB RL-E is a metal cutting, magnetic-based core drill that is perfect for users who require heavy duty drilling or tapping. Includes: variable height adjustment, a smooth start, 4-Speed gearbox, overload protection and emergency shut-down of the motor, indicated by LED sensor. This drill carries a 1-year warranty.
Features At A Glance:
  • 30° Left-Right Swivel Base with adjustable foot on bottom of handle
  • Built-in overload protection and emergency shut-down
  • Tapping up to 1-3/16 (M30)
  • 2 speed Gearbox in RB40RL-E and 4-speed gear box in RB60RL-E and RB100RL-E models
  • Electronic Speed Control with reverse
  • Left and right rotation
  • Minimum Material Thickness of 3/8 inch (10 mm)
  • Cord length 16 feet
  • 230 or 110 volt
Package Includes:
  • ALFRA RotaBest™ RB RL-E Magnetic Base Core Drill
  • ALFRA 4000 Coolant Spray
  • ALFRA MT3 Tool Holder
  • Coolant unit with hose and nipple
  • Safety belt
  • User manual
  • Carrying case
Alfra RotaBest Magnetic Drill : RB B  Economic series
Overview:
ALFRA RotaBest™ RB B is our front line basic metal cutting, magnetic-base core drill that is perfect for users who require heavy duty drilling or tapping. Self adjusting slide and smooth start. With the use of a drill chuck adaptor, this unit can hold a short drill bit with a maximum of 1/2". This drill carries a 1-year warranty.
Features At A Glance:
  • Built-in grease gearbox
  • Self-adjusting guides
  • Tapping function in RB50B and RB130 models
  • Soft-touch grips
  • Ergonomic switch keypad
  • Optimized for weight and performance
Package Includes:
  • ALFRA RotaBest™ RB B Magnetic Base Core Drill
  • Coolant unit with hose and nipple
  • Safety belt
  • User manual
  • Carrying case
Low Profile Magnetic Drill : RotaBest V32
Overview:
ALFRA RotaBest™ V32 is a low profile, metal cutting, magnetic-based core drill that is perfect for restricted spaces. At only 7-1/4" high with handle or 7" without, this machine performs on steel construction - in between girder flanges, vehicle construction - truck frames, bridge construction, wherever there is a size constriction. The switchable ratchet lever allows for left or right hand operation.
This unit designed for industrial use and has a powerful duel coil magnet to adhere to even painted material, such as truck frames. The gears are permanently lubricated to avoid a dry running gearbox, which leads to longer gear life.
There is no brass motor guide system (GIB) to adjust. The cutter travels by means of a two rail system so no maintenance is required.
Features At A Glance:
  • Low profile design for use in confined spaces
  • Powerful yet compact motor
  • Compact miter gearbox
  • 2-rail guide slide
Package Includes:
  • ALFRA RotaBest™ V32 Magnetic Base Core Drill
  • Rachet lever
  • Coolant unit with hose and nipple
  • Allen key for Weldon arbor
  • Safety belt
  • User manual
  • Carrying case
Vaccum plate for Magnetic Drill and Vaccum Drill RB 50 X - VacuBest series
RB 50 X VacuBest:
Automatic shut-off of motor in case of vacuum loss
Adjustable laser cross
Machine is mounted on the vacuum plate rotatable 270°
Vacuum pump can be controlled by the core drilling machine
Use on non-magnetic surfaces such as aluminium, copper, brass,
stainless steel, plastics, wood and textured surface (e.g. corrugated and chequer plate)
Core drilling in metal: Ø 2"
Drilling in wood: Ø 3.9"
Drilling depth: 2"
Power consumption: 1200 W
2 speed gearbox: 250/450 rpm
Arbor: available as 3/4" Weldon or MT2
Coolant feed:automatically integrated from the top through the spindle
Voltage: 230 volt or 110 volt (50-60 Hz)
Vacuum adhesion force: 9000 N
Tool force(at - 0.9 bar): 2300 N
Printing: - 0.9 bar / - 90kPa

VACUUM SYSTEM for Magnetic Drills
Use on non-magnetic surfaces such as copper, aluminium,
brass, stainless steel, plastics and textured subsurface
(e.g. corrugated and chequer plate)
Suction capacity: 25l/min
Max. vacuum mbar (abs.): 200
Overpressure mbar: 300
Dimensions of suction plate: 15.75" x 7.87 mm
package include: Pump , vacuum plate, 10 feet suction pipe
ALFRA RotaBest HSS and TCT Annular cutters for Magentic drill
ALFRA RotaBest HSS (High Speed Steel) Annular cutters have specially designed cutting geometry for immediate centering, smooth cutting and low torque. Our ¾” Weldon shank includes two clamping surfaces and one countersink for dual use in RotaQuick tool holders.
Each cutter has an internal bore for ejector pin and coolant supply, conical grinding and is compatible for all quick change and weldon shank tool holders.
  • Polished section: with pre- and post-cutter

ALFRA RotaBest TCT (Tungsten Carbide Tipped) Annular cutters are recommended for use with structural steel, stainless steel and non-ferrous metals such as aluminum and CuZn alloy. The uniquely shaped chip groves prevent the cutter from jamming due to chip ejection.
  • 3/4" Weldon shank, compatible with Nitto Kohki;
  • Special tooth positioning for smooth break through;
  • Rapid core removal with ejector pin.

ALFRA TCT (Tungsten Carbide Tipped) Hole Saw is a multi-range Hole Saw for universal use up to a material thickness of 3/8". It is suitable for flat materials, pipes, curved and vaulted surfaces.
  • For use on stationary and hand drilling machines;
  • Teeth can easily be replaced or resharpened;
  • Exchangeable center pin;
  • ISO, PG, Metric and Conduit sizes available;
  • Not suitable for use with automatic feed.
Back to content