Machine Tools
Novo
Tech
Go to content

KARMETAL Dual Column Bandsaw

Dual Column High Speed CNC Bandsaw : ULTRA 300
High Speed CNC Band Saw

●
■
▬
∡
ULTRA 300x330
11.8"
11.8"
13"x11.8"
0°
Features:
  • High speed dual column CNC band saw
  • down feed and shuttle travel by servo motor
  • CNC controller adjusts dwon feed speed and blade speed according to workpiece diameter,shape and material and blade TPI automatically
  • with 2 traveling vises to reduce workpiece remnant length
  • 4 different sawing mode (Normal, Blade Saver, High Performance, Ultra Performance)
  • load on the ball screw Reduced by hydraulic cylinder
  • both rear and front shuttle vises are driven by Servo motor
  • Front vise can go beyond the blade to pull the remaining piece to reduce remnant to 10 mm
  • Servo motor driven rear vise stroke : 19"
  • Servo motor driven front vise stroke : 12"
  • 7 Color warning light
  • this cnc bandsaw comes with 16,1 kW High Torque Main Motor
  • 30° canted wheels to lower blade fatigue due to blade twist
  • Blade swarf Brush System with two brushes in two sides of the blade
  • Automatic PLC control programmable up to 50 jobs with 100 in queue
  • hydraulic jaws on both sides of shuttle to avoid scratching workpiece while traveling
  • Full stroking hydraulic vise
  • Blade breakage switch
  • Inverter drive allows for infinite blade speed adjustments
  • Cast iron band wheels
  • Replaceable blade brush
  • variable vise pressure
  • guide arm is mechanically connected to the front vise moveable jaw for proper guide arm spacing
  • Robust steel base
  • two 7' infeed Table With Side and Bottom Sheet Cover
  • Linear Motion guides eliminates vibration
  • Hydraulic band tensioning
  • downfeed Speed control by servo motor and ball screw
  • Hydraulic carbide guide tensioning
  • Band tension indicator
  • band jam sensor
  • Safety door interlocks
  • Flood coolant
  • Replaceable carbide guide inserts
  • Chip Conveyor
  • to find the best bandsaw for sale contact NovoTech
Optional Features:
  • Fully Autamated Material Feeding System
  • Mist lubrication
  • blade deviation sensor to prevent out of square cutting
  • mist collector
  • Intelligent Cross-section Scanning for bundles and tangled workpiece
  • overhead bundling clamps
  • Laser light
ULTRA 300 x 330 high speed CNC Band Saw Machine<br />
ULTRA 300 High Speed CNC band saw machine<br />
Dual Column High Speed Bundle Cutting CNC Band saw : VEGA
High Speed bundling CNC Band Saw

●
■
▬
∡
VEGA 600x700 S-Line
23.6"
22.8"
27.5"x22.8"
23.6"x19.7"
0°
VEGA 600x700
23.6"
22.8"
27.5"x22.8"
23.6"x19.7"
0°
Features:
  • shuttle vise features automatic multi-indexing up to 30” in a single stroke
  • Servo Down feed in VEGA S-Line and Hydraulic down feed in VEGA series
  • CNC controller in metal cutting band saw adjusts dwon feed speed and blade speed according to workpiece diameter,shape and material and blade TPI automatically
  • 4 different sawing mode (Normal, Blade Saver, High Performance, Ultra Performance)
  • load on the ball screw Reduced by hydraulic cylinder
  • this metal bandsaw include 1300 different predefined materials
  • rear shuttle vise driven by Servo motor
  • 7 Color warning light
  • Blade swarf Brush System with two brushes in two sides of the blade
  • Automatic PLC control programmable up to 50 jobs with 100 in queue
  • hydraulic jaws on both sides of shuttle to avoid scratching workpiece while traveling
  • Full stroking hydraulic vise
  • Blade breakage switch
  • heavy duty direct blade drive
  • Inverter drive allows for infinite blade speed adjustments
  • Cast iron band wheels
  • Replaceable blade brush
  • variable vise pressure
  • guide arm is mechanically connected to the front vise moveable jaw for proper guide arm spacing
  • Robust steel base
  • two 7' infeed Table With Side and Bottom Sheet Cover
  • Linear Motion guides eliminates vibration
  • Hydraulic band tensioning
  • downfeed Speed control by servo motor and ball screw (in S-LINE model)
  • Band tension indicator
  • band jam sensor
  • Safety door interlocks
  • Flood coolant
  • Replaceable carbide guide inserts
  • Chip Conveyor
Optional Features:
  • Fully Autamated Material Feeding System
  • Mist lubrication
  • blade deviation sensor to prevent out of square cutting
  • mist collector
  • Intelligent Cross-section Scanning for bundles and tangled workpiece
  • Laser light
Dual Column Automatic Bundle Cutting Bandsaw : WOS
Dual column bundling Band Saw

●
■
▬

∡
WOS 600x700
23.6"
22.8"
27.5"x22.8"
23.6"x19.7"
0°
WOS 560x700
22"
22"
27.5"x22"
23.6"x19.7"
0°
WOS 500x550
19.7"
19.7"
21.6"x19.7"
19.7"x17.7"
0°
WOS 400x450
15.75"
15.75"
17.7"x15.75"
15.75"x14.2"
0°
Features:
  • shuttle vise features automatic multi-indexing up to 26.5” in a single stroke
  • this band saw machine has a powered Blade swarf Brush
  • Automatic PLC control programmable up to 50 jobs with 100 in queue
  • hydraulic jaws on both sides of shuttle to avoid scratching workpiece while traveling
  • out of stock switch
  • this horizontal band saw comes with Blade breakage switch
  • heavy duty direct blade drive
  • Inverter drive allows for infinite blade speed adjustments
  • Cast iron band wheels
  • Positive downfeed
  • High resolution feed rate valve allows for constant feed rate when cutting special alloys
  • Robust steel base
  • Linear Motion guides eliminates vibration
  • Hydraulic band tensioning
  • Flood coolant
  • Replaceable carbide guide inserts
  • Chip Conveyor
  • to find the best band saw for your shop contact NovoTech

Optional Features:
  • Mist lubrication
  • Laser light
KMT 500 WOS fully automatic servo feeder pipe bundle cutting band saw<br />
KMT 500 WOS dual column tube bundle cutting band saw<br />
Dual Column Automatic Bundle Cutting Band Saw (short remnant): WOS M3
Dual column bundling Band Saw with 3 vises

●
■
▬

∡
WOS 500 M3
19.7"
19.7"
21.65"x19.7"
19.7"x11.8"
0°
Features:
  • dual column NC bundle cutting band saw with 3 traveling vises to reduce workpiece remnant length
  • shuttle vises travel by servo motor
  • shuttle vises in this bandsaw machine features automatic multi-indexing up to 26.5” in a single stroke
  • powered Blade swarf Brush
  • Automatic PLC control programmable up to 50 jobs with 100 in queue
  • hydraulic jaws on both sides of shuttle to avoid scratching workpiece while traveling
  • out of stock switch
  • Blade breakage and jam switch
  • heavy duty direct blade drive
  • Inverter drive allows for infinite blade speed adjustments
  • Replaceable blade brush
  • variable vise pressure
  • Positive downfeed
  • High resolution feed rate valve allows for constant feed rate when cutting special alloys
  • this automatic saw has a Robust steel base
  • Linear Motion guides eliminates vibration
  • Hydraulic band tensioning
  • Band tension indicator
  • band jam sensor
  • Safety door interlocks
  • Flood coolant
  • Replaceable carbide guide inserts
  • Chip Conveyor
Optional Features:
  • Mist lubrication
  • Laser light
  • long stroke feeder
KMT 440 WOS M3 pipe bundle cutting band saw with servo feeder<br />
KMT 440 WOS M3 full automatic NC tube bundle cutting band saw with 3 vises to reduce remnant length<br />
Dual Column Semi Automatic Double Mitering Bandsaw : KDG  
Semi automatic Double mtering Band Saw

●
■
▬
∡
KDG 700x1250 DM
27.5"
27.5"
49.2"x27.5"
±45°,+60°
KDG 560x1050 DM
22"
22"
41.3"x22"
±45°,+60°
KDG 460x700 DM
18.1"
18.1"
31.5"x18.1"
±45°,+60°
Features:
  • Blade breakage switch
  • direct blade drive – no belts/pulleys
  • Inverter drive allows for infinite blade speed adjustments
  • guide arm is mechanically connected to the front vise moveable jaw for proper guide arm spacing
  • Easy access electrical panel
  • Robust steel base
  • Positive downfeed
  • High resolution feed rate valve allows for constant feed rate when cutting special alloys
  • metal cutting band saw machine has Cast iron band wheels
  • Automatic PLC, touch screen control
  • motorised blade brush
  • Cast iron guide arms are adjustable for proper spacing.
  • Cutting head return position can be altered for faster cycle times between cuts on smaller pieces.
  • Easy access electrical panel
  • Out of stock switch
  • you can find suitable metal bandsaw for sale in NovoTech
Optional Features:
  • Mist lubrication
KMT 700 KDG dual column left and right miter cutting band saw<br />
KARMETAL 560 KDG dual column semi automatic left and right mitering band saw<br />
Double Column Semi Automatic metal cutting Bandsaw : KSA
Semi automatic straight cutting Band Saw

●
■
▬
∡
KSA 1300x1500
51.2"
51.2"
59"x51.2"
0°
KSA-D 800x1250
33.3"
31.5"
49.2"x31.5"
0°
KSA 600x800
23.6"
22.8"
31.5"x22.8"
0°
KSA 560x800
22"
22"
31.5"x22"
0°
KSA 500x650
19.7"
19.7"
25.6"x19.7"
0°
Features
  • large band saw with On-demand hydraulics to save energy
  • double vise in KSA-D model
  • Blade breakage switch
  • direct blade drive – no belts/pulleys
  • Inverter drive allows for infinite blade speed adjustments
  • Cast iron band wheels
  • Replaceable blade brush
  • Cast iron guide arms mounted in horizontal band saw is adjustable for proper spacing.
  • horizontal metal bandsaw Cutting head return position can be altered for faster cycle times between cuts on smaller pieces.
  • Positive downfeed
  • Easy access electrical panel
  • Robust steel base
  • Hydro-mechanic band tensioning
  • Safety door interlocks
  • Flood coolant with wash down hose
  • Laser light
  • Variable vise pressure
  • Comes with heavy-duty infeed table for easier material handling.
  • Hardened replaceable wear plates on material vises
  • Industrial-grade hydraulics open and close the vise
  • to get a band saw machine price contact us now!
Optional Features:
  • Mist lubrication
KMT 800 KSA dual column band saw double vise<br />
KMT 600 KSA dual column heavy duty band saw with powered conveyor<br />
Dual Column Full Automatic Horizontal Bandsaw : OSA PLC
Full Automatic straight cutting Band Saw

●
■
▬
∡
OSA PLC 560x650
22"
22"
25.6"x22"
0°
Features
  • Fully automatic feed and cutting functions manage the transitions between cuts in this steel cutting bandsaw
  • On-demand hydraulics save energy
  • Automatic chip removal auger
  • direct blade drive – no belts/pulleys
  • Inverter drive allows for infinite blade speed adjustments
  • Cast iron band wheels
  • Automatic PLC, touch screen control
  • OSA fully automatic bandsaw machine include motorised blade brush
  • Cast iron guide arms mounted is adjustable for proper spacing.
  • Positive downfeed
  • High resolution feed rate valve allows for constant feed rate when cutting special alloys
  • Cutting head return position can be altered for faster cycle times between cuts on smaller pieces.
  • Easy access electrical panel
  • Robust steel base
  • Hydraulic band tensioning
  • Safety door interlocks
  • this band saw cutting comes with Flood coolant with wash down hose
  • Laser light
  • Replaceable carbide guide inserts
  • Variable vise pressure
  • Comes with heavy-duty infeed table for easier material handling
  • Hardened replaceable wear plates on material vises
Optional Features:
  • Mist lubrication
KMT 540 OSA PLC full automatic double column band saw<br />
Custom Material handling solutions for Band saw Machines
Features
Beyond providing standard product lines of high-quality industrial bandsaws,KARMETAL also provides custom material and H beam handling systems for metal cutting bandsaws,we provide Sawing Solutions to help our customers improve product quality and increase productivity.
Karmetal band saw automatic transfer and feeding Line<br />
KMT 500x650 KSA dual column band saw with automatic material handling system<br />
Back to content