Corner Notcher - NovoTech Machine Tools

Machine Tools
Novo
Tech
Go to content
Sheet Metal Corner Notcher
Sheet metal corner notcher (Variable angle) : HNM6V
  • Ever had odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right?  Enter the HNM6V; this great machine is a 220 volt three phase hydraulic sheet metal notcher.
  • The oversized 45” x 24” table includes table guides and miter blocks to ensure accurate notches every time.
  • Blade angle is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal.
  • This notcher will cut notches from 30 to 140 degrees in mild steel up to 6.5mm in thickness and will do this at up to 30 strokes per minute.
  • The HNM6V sheet metal notcher has 7.8” long blades that are negatively raked to pull the material to the stops during the cut.  The blades can also be resharpened many times for even more life and cost savings.

Combo notching and punching machine (Variable angle) : HNM6 VP
    • this combo notching and punching machine,can notch sheet metal up to 4 gauge and punch up to Ø 0.55" x 4 gauge
    • The oversized 45” x 24” table includes table guides and miter blocks to ensure accurate notches every time.
    • Blade angle is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal.
    • This notcher will cut notches from 30 to 140 degrees in mild steel up to 6.5mm in thickness and will do this at up to 30 strokes per minute.
    • The HNM6VP sheet metal notcher has 7.8” long blades that are negatively raked to pull the material to the stops during the cut.  The blades can also be resharpened many times for even more life and cost savings.

Sheet metal notcher (fixed angle) : HNM- F
  • If you are looking for a little more capacity from your corner notcher, try the HNM-F sheet metal corner notcher .
  • The HNM-F is great for making perfect corners in metal that are impossible with hand tools.
  • These corner notchers have 3-6mm mild steel capacity, so it can make quick work of most any job.
  • this corner notcher has blades that are fixed at 90°, ensuring a perfect notch every time.
  • oversized working table includes table guides, for even more accuracy.
  • long blades can be resharpened many times for even more life and cost savings.
  • The blades are also negatively raked to pull the material to the stops during the cut, for the most accuracy available.
  • machine comes with a operator controlled foot pedal


            Foot operated corner notcher FPN
            • Notching corners is a staple of any fabrication shop. Good clean notches are the difference between a great product and a not so great one.  The FPN1.5 sheet metal corner notcher is an economical way to make perfect 90 degrees corners in mild steel sheet metal up to 16 gauge.
            • The FPN1.5 is very easy to use, because of its spring assisted shear mechanism.
            • Just stomp on the foot pedal to produce clean crisp notches.
            • This 90 degree fixed sheet metal notcher will produce notches up to 3” x 3”.
            • All sideways are adjustable and have gibs built in for wear.
            • There are also table stops for fine-tuning the notch.
            • This machine is built to last.

            Manual corner notcher : MN
            • The MN manual corner notcher is a high quality sheet metal notcher perfect for any garage or sheet metal shop.
              Because of the high quality components used to make the MN, the finished notches are extremely clean and have burr free edges.
            • The MN sheet metal notcher includes a sturdy floor stand, freeing up valuable worktop space.
            • Adjustable guides on the oversized table allow for accurate repeatable notches.
            • The cutting angle is fixed at 90 degrees
            • For your safety we have included a blade guard to save your fingers.

            Optional Equipment:
            • Stand
            Back to content